Silicon,EPR,PCP,CSP and rubber insulalted wires and cables..
Welcome to K9 Cables, the dedicated industrial cable supplier of K9 Industrial Electrical Distributors. We sell a full range of industrial cables to customers in the INDIA and around the world. We have put a selection of the most popular cables on this web site. If you have a more individual requirement, please do not hesitate to contact us.
SILICON,RUBBER WIRES & CABLES ELECTRICAL WIRES AND CABLES.
K9 CABLES & CONDUCTORS, Aram bagh New Delhi
Delhi INDIA.
new delhi, Delhi India 110055.
India
ph: 09953823408
bharatne
PRODUCTS DETAIL.
Flexible Rubber Cable/ Silicon Rubber Cables.
Flexible tinned annealed copper conductors, Ethylene Propylene (EP). Rubber insulated / hlorosulphonated polyethylene (CSP) sheathed 300 / 500 volts grade (where applicable).
Operating temperature : Maximum : 85oC; Minimum flexing : -20oC
HOFR : Heat and oil resistant, flame retardant
Sheath colour :
Single to five core - black or white
Six core and above - black
Conductor identification :
Single core - black
Two core - brown and blue
Three core - brown, blue and green / yellow
Four core - brown, blue, black and green / yellow
Five core - brown, blue, 2 black and green / yellow
Six core and above - white insulation with black numerals
Minimum bending radius : 6 x overall diameter for cables not exceeding 25mm and 8 x overall diameter for cables exceeding 25mm
Standards: : flexible electric cables for use with appliances and equipment intended for domestic, office and similar environments & BS7919: flexible electric cables for use with appliances and equipment intended for industrial and similar environments.
Used as connecting cable, as measuring, checking and control cable in machine tool manufacturing, plant engineering and on assembly lines and production lines to meet stringent safety requirements. Suitable for fixed installation or flexible applications with unrestricted mobility without forced movement control and without exposure to tensile load. installation in dry and moist rooms; outdoor installation not permitted As per IS:694.
- Fine strands of bare copper conductor
- Stranding acc. to VDE 0295, class 5
- PVC core insulation black with continuous white figure imprint
- Earth conductor green / yellow in the outer layer
- PVC outer sheath grey/black.
- Bending radius 15 x ø
Temperature range flexing : -5oC to +80oC
static : -40oC to + 80oC..
Screened cable.
K9CC has designed a data cable specifically for the oil industry that can be used on petrol forecourts implementing chip and pin - and which meets the spirit of the requirement of the Blue Book.
| Part Number : | KF-FDC4 |
| Conductor size : | 24AWG |
| Number of pairs : | 4 foil screened |
| Category : | CAT 5E |
| Maximum operating voltage : | 500v continuous, 2500v 5 mins |
| Nom. Capacitance @ 1KHz | 15pF / ft |
| Characteristic impedance | 100 ohms (+/ - 15) |
| Mechanical construction : | Galvanise steel wire braid (GSWB) / Polyurethane (PU) sheath |
| Outer sheath material : | Irogran A 85 P 4380 petro-chemical |
| Diameter : | Min O/D 9mm, Max O/D 10mm, CAT5 6.0mm, R.T. PU Sheath 1.5mm |
| Bending radius : | 80mm static, 120mm dynamic |
| Drum length : | 305 metres / 1000 feet |
| Weight : | 113.0 Kg / Km Air, 330.0 Kg / Km water (APPROX.) |
Part 1 - Type 2 - Armoured : Collectively Screened and Individually & collectively screened
BS5308 Part 1 / Type 1 Unarmoured Construction
1. Plain annealed copper wire conductors to BS 6360
2. Type 03 polyethene insulation to BS 6234. 
3 Individual pair screen (optional):-
a) Aluminium/polyester tape, metallic side down, in contact with minimum 0.5mm2 tinned copper drain wire
b) Polyester isolating tape(s) numbered for identification
4 Polyester binder tape
5 Collective screen (optional) - Aluminium/polyester tape, metallic side down, in contact with minimum 0.5mm2 tinned copper drain wire
6 Type 2 PVC sheath .
BS5308 Part 1 / Type 2 Armoured Construction
1 Plain annealed copper wire conductors to BS 6360
2 Type 03 polyethene insulation to BS 6234 
3 Individual pair screen (optional):-
a) Aluminium/polyester tape, metallic side down, in contact with minimum 0.5mm2 tinned copper drain wire
b) Polyester isolating tape(s) numbered for identification
4 Polyester binder tape
5 Collective screen (optional) - Aluminium/polyester tape, metallic side down, in contact with minimum 0.5mm2 tinned copper drain wire
6 Type 03C black polyethylene bedding to BS 6234
7 Single layer galvanised Iron (GI) wire armour to BS EN 10257-1
8 Type 2 PVC sheath .
BS5308 Part 2 / Type 1 (unarmoured)
1 Plain annealed copper wire conductors to BS 6360
2 Type TI1 PVC to BS 7655 
3 Individual pair screen (optional):-
a) Aluminium/polyester tape, metallic side down, in contact with minimum 0.5mm2 tinned copper drain wire
b) Polyester isolating tape(s) numbered for identification
4 Polyester binder tape
5 Collective screen (optional) - Aluminium/polyester tape, metallic side down, in contact with minimum 0.5mm2 tinned copper drain wire
6 Type TM1 or Type 6 PVC sheath to BS 7655
BS5308 Part 2 / Type 2 (armoured)
1 Plain annealed copper wire conductors to BS 6360 
2 Type TI1 PVC to BS 7655
3 Individual pair screen (optional):-
a) Aluminium/polyester tape, metallic side down, in contact with minimum 0.5mm2 tinned copper drain wire
b) Polyester isolating tape(s) numbered for identification
4 Polyester binder tape
5 Collective screen (optional) - Aluminium/polyester tape, metallic side down, in contact with minimum 0.5mm2 tinned copper drain wire
6 Type TM1 PVC bedding to BS 7655
7 Single layer galvanised steel wire armour to BS EN 10257-1
8 Type TM1 PVC sheath to BS 7655
Galvanized Wired Armoured cable is the accepted standard for underground installations. This enables you to run cables underground or through water filled ducts with confidence. The table below show the most commonly used sizes but if you cannot find the cable for your application do not hesitate to contact our sales department.AS PER IS:1554 & 7098. (FOR MORE TECHNICAL DETAIL CLICK HERE)
Armoured Cables:
- Insulation: PVC or XLPE (Cross Linked Polyethylene)
- Bedding: Extruded PVC.
- Armour: Galvanised Steel Wire Armour,
- Sheath: PVC Black.
- Conductor: Stranded or Solid Plain Annealed Copper.
- Application: Designed for use in mains supply electricity. These cables are provided with mechanical protection are therefore suitable for external use and direct burial.
- Technical Data: Voltage: 600/1000.
- Temperature range: 0oC to +90oC
- Relevant Standards: Conductor:To IS:8130, BS6360,
- Armour:To IS: 3975, BS442.
- Sheath:To IS :5831, BS6746 Type G.
- Core Identification: 2 Cores:IS:Red Black./BS:Blue, Brown 3 Cores: IS: Red,Yellow & Blue. BS:Brown, Black, Grey.
- 4 Cores:IS:Red,Yellow,Blue,Black.BS: Blue, Brown, Black, Grey 5 Cores (6mm andbelow):IS:Red,Yellow,Blue,Black,Gray.BS: White Insulation With Black Numbers 6 Cores (10mm and above) :
- IS: core & above-Two adjacent cores (counting 7 direction) i n each layer,Blue and Yellow,remaing cores Grey.Core numbering and diffrent colours are also given for control & paired.
- BS:Brown, Blue, Black, Grey and G/Y
XLPE / PVC / AWA / PVC (Copper) IS:5831 / IS:7098 international Specifications BS5467.
Single Core Plain annealed copper conductor, XLPE insulated / PVC extruded bedded / Aluminium wire armoured / PVC sheathed. 600 / 1000 volts grade.
- Single core PVC insulated cable specifically designed for use in switch control, relay and instrumentation panels and for motor starters and controllers.
- Plain annealed copper conductors with heat resisting PVC insulation rated up to +105 oC .
- Maximum working voltage: 600 Volts
- Flexible plain annealed copper conductor, single core heat resistant PVC cable
- The minimum bending radius is 6 x the overall diameter
A high temperature silicone cable with steel wire braid - suitable for industrial areas where PVC insulated cables become brittle with increased temperature and mechanical requirements for example mechanical engineering, glass and ceramic fabrication and steel / iron fabrication. Should the cable burn, an insulation silicon dioxide layer will remain on the conductor to render it short circuit proof.
Cable Construction | |
| Conductor : | Stranded conductor of tinned copper wire according. |
| Colours : | To VDE 0293, more than six cores black with printed numbers in layers. |
| Twisting : | Cores twisted in layers. |
| Sheath : | Silicon outer sheath, red - brown. |
| Armouring : | Galvanised steel wire braid. |
Technical Data | |
| Temperature range : | - 50 oC up to 180oC short term + 200oC |
| Rated voltage U0 / U : | 300 / 500 V |
| Test voltage : | 2000 V |
| Min bending radius : | 10 x diameter |
| Insulation resistance : | Min. 20 MΩ x km at 20oC |
| Halogen free | To VDE 0472 part 813 and IEC 754-1 |
YY LSZH Applications
These Halogen Free control cables are suitable for electrical installations in dry and damp interiors and outdoors if UV protection and temperature ranges are observed. It is suitable as a measurement, sensing and control cable in the machine tool manufacturing, engineering, power stations, heating and air conditioning installations, refrigeration and date processing installations.
Benefits
The halogen free control cables are oil resistant (SEV TP 20B), widely resistant against chemicals, rough but extremely flexible. The materials are flame retardant and self extinguishing according to IEC 60 332.1, IEC 60 332.2, IEC 60 332.3.
- The amount of gas and smoke produced is very low (IEC 61034-1).
- No corrosive substances or gases will be released
- Used in all areas where fire hazards and / or many people or high property values are concentrated
- In the event of fire very low corrosive values only are measured in the conflagration gases (IEC 60 754-2) and lack of halogen in the materials (In accordance to IEC 60 754-1) prevent the formation of poisonous gases, dioxins and furanes
- Considerable damage to human life, the environment, building and installations are avoided
YY LSZH Cable Specification
- Fine strands of plain copper wires
- Halogen free polymer compound insulation
- Cores twisted in layers
- Black with white numbers or Colour coded
- Green-yellow protecting conductor
- Outer sheath of oil resistant (SEV TP 20 B) halogen free compound
- Flame resistant (IEC 60 332.3)
- Silver grey (RAL 7001) or black and white
The number coded cable has been created for public events for example concerts, light and sound events, external performances etc for the protection of the sound and light equipment.
- Fine strands of bare copper wire
- Stranding acc. to VDE 0295 class 5
- PVC core insulation black with continuous white figure imprint
- Earth conductor green/yellow in outer layer
- PVC outer sheath black, RAL 9005
- Bending radius 15 x Ø
- Working voltage : 500V
- Test voltage : 2000V
- Temperature range flexible : -5oC to + 80oC
- Temperature range static : -40oC to + 80oC
Silicon Single Core with Glass Fibre Braiding Cable
Suitable where PVC insulated cables become brittle due to high temperature variations. Silicone insulated single cores are preferably used in the metallurgical industry, steel works, hot rolling mills, coking plants, foundries etc. Insulation consists of silicone rubber. It is resistant to vegetable and animal fat, many types of oil and diluted acids. No decomposition occurs when exposed to alcohol, alkaline solutions, etc. The insulation is resistant to oxygen and ozone. Should the cable burn, an insulation silicone dioxide layer will remain on the conductor to render it short circuit proof. Additional mechanical protection due to the glass fibre braid.
- Fine strands of tinned copper wire
- Stranding acc. to VDE 0295 class 5
- Core insulation made of silicone rubber
- Glass fibre braiding
- Bending radius 15 x ø
Temperature range flexing : - 60oC to + 180oC
Temporarily : to +200oC.
Thermocouple Cables :
Thermocouple cables are used to transmit signals from the thermocouple to the control unit using conductor materials which have the same e.m.f. output as that of thermocouple unit.
In Thermocouple Extension cables the conduct or metal/alloys are the same as that of the thermocouple leads.
Thermocouple Compensating cables, which are a cheaper alternative to Thermocouple Extension cables are available at competitive prices. These cables incorporate different alloys whichgive the same e.m. fooutput (within a limited temperature range) as those in the thermocouple.
100 Ω/120 Ω Balanced PCM Cables for Transmission Equipment Installation
Ref. Standandards: Lucent, Ericsson, Alcatel & TEC
Conductor: Solid plain annealed copper to IEC 60228
Insulation: PE/Foam PE.
Pair Colour: A Wire-Red, B Wire-Blue
Lay-up: Two insulated conductors twisted to form a pair, Screened with numbered Aluminium mylar tape with 0.5mm ATC earth wire. Required number of pairs are laid up, stranded together to form a compact circular cable.
Wrapping: Polyester or polyethylene tapes are taped around the cable for isolation.
Screening: Aluminium mylar tape lapped with overlap. Nominal thickness of tape is 0.05mm with earth wire 0.5mm ATC.
Braiding (Optional): 0.15mm ATC braiding with minimum coverage of 30% and 35-40° braid angle.
Sheath: PVC/FR/FRZH
0.4, 308.0, 5000, 2000, 120, 2.5, 70, 0.5, 187.9, 5000, 2000, 120, 2.5, 70
Relemac twisted paired cables are best suited for telephone and switchboard cabling applications. The conductor is make of solid annealed, high conductivity bare copper. The conductor is insulated with special grade high-density polyethylene different colours. The insulated cores are twisted with uniform lay to form pairs and are bunched together in such a manner so as to minimise cross talk. In 50 and 100 Pair cables the units of 10 and 20 pairs respectively are identified with colour binders and stranded to form the laid up cable. The laid up cable is taped with polyester tape and further jacketed with a grey / black colour PVC with high oxygen and temperature index. The cables can be used for switchboard and internal telephone wiring in high-rise buildings, offices, factories, hotels, residential complexes etc. They generally conform to ITD specifications G/WIR-06/02 May 94.
Stringent quality control in every stage from raw material to manufacturing upto finished product, guarantees high quality.
Salient Features: Low Attenuation, Low Crosstalk
Application: This cable is intended as a transmission medium for carrying 2 Mb/s digital signal.
Fire Survival Cable
Solid/Stranded (ATC/ABC) Copper conductor, insulated with specially formulated PVC/TPE/XLPE to form a core. Cores laid up together or twisted to form a pair/triad depending upon the individual requirement. Such cores/pairs/triads after laying are coated with special Fire Resistant materials and overall sheathed with special PVC/TPE/LSZH.
· Shielding with Braiding/Aluminium mylar taping will be done overall or individually depending upon the requirement.
· Armouring provided depending upon requirement with a extruded inner special PVC/TPE sheath, and overall sheath of special PVC/TPE.
Application :
To maintain circuit integrity during and after Fire
FIRE SURVIVAL TEST
Identification :
Shall be as per cable type Control/Instrumentation Signal/Thermocouple Extn./Compensating as per their respective features list.
Other combinations of colour, numerals and alphabet coding will be provided as per customer satisfaction/requirement
Standard Specifications :
ICE 331/ BS 6387, IEC 60331,
BS 6387 - CAT A,B,C,W,Z
BS 7846 - CAT F1, F2, F3
Characteristics :
Will withstand Flame temperature of 750 degree centigrade upto 3 hours without electrical breakdown at rated voltage.
Does not produce noxious smoke & fumes which hinder fire fighting and endanger life.
Does not propagate flame. Special properties: Zero Halogen Low Smoke insulation & sheath material supplied on request.
Delivery Lengths :
500 - 1000 meters.
Special Properties :
Zero Halogen Low Smoke insulation & sheath material supplied on request.
Brass and aluminium are not compatible metals and contact between them can result in electrolysis action, therefore precautions must be taken when connecting Brass Glands to Aluminium enclosures or to the Aluminium armouring of cables.
SILICON,RUBBER WIRES & CABLES ELECTRICAL WIRES AND CABLES.
K9 CABLES & CONDUCTORS, Aram bagh New Delhi
Delhi INDIA.
new delhi, Delhi India 110055.
India
ph: 09953823408
bharatne